Killaveenoge Wind Farm Induction – Curranashingane, Dunmanway, Cork.

The PSCS role on this site is under the control of Killaveenoge Windfarm Ltd. with David Egan (+353 (0)86 4109155) being the site representative. Please read the following points before entering Killaveenoge Wind Farm.

The Wind Farm Operations Contact Number to call is +353 (0) 217355898 and notifications of all planned work on site should be emailed to: killaveenoge@turnkeydev.com

1. Personal Protective Equipment (PPE)

H-S-SignSafety Helmet, Safety footwear, High Visibility Jacket/ Vest MUST be worn on site at all times. Other safety equipment is necessary according to the work involved e.g. eye/face protection, safety harnesses, etc. when identified in the method statements and risk assessments. Gloves are to be worn when handling materials or tools that could burn, cut, tear or cause any injury to hands.

 

2. Operational Controller Contact Procedure

The following procedure should be followed by all personnel visiting Killaveenoge Wind Farm for the purposes of work, inspection or testing on the windfarm plant or infrastructure. WFSO Ltd. are appointed as the Operational Controller for the Wind Farm site.

Any contractor or personnel visiting Killaveenoge Wind Farm for the purposes of work, inspection or testing on the windfarm plant or infrastructure must notify the Operational Controller of their presence before entering the windfarm.

Personnel entering the windfarm will provide the following information:

  • Work party details,
  • Planned location of works,
  • Reason for visit,
  • Expected finish time,
  • Description of works,
  • Any known issues or work being undertaken at the windfarm,
  • For all planned activities onsite, the OC should have prior notice and a copy of the relevant Method Statements & Risk Assessments to be emailed to the addresses below,
  • All work parties Must Notify the OC When Leaving the Site (No Exceptions)

The Operational Controller should have prior notice of the work, personnel involved and have been supplied with Risk Assessments and Method Statements where appropriate.

The WFSO Operational Controller Contact Number is +353 (0) 217355898.

Notification of all planned work on site should be emailed to:

killaveenoge@turnkeydev.com
colette.horgan@turnkeydev.com

 

I agree to comply with the above mentioned rules and to follow site guidelines.